Wet Room Flooring in Peterborough — Waterproof, Safe & Professionally Installed
Looking for wet room flooring in Peterborough? Cambridgeshire Carpets supplies and installs specialist wet room flooring for residential and commercial properties across Peterborough and the surrounding 10-mile radius — including Orton, Werrington, Hampton, Bretton, Longthorpe, Stanground, Whittlesey, Yaxley, Market Deeping, and Stamford.
A wet room demands a completely different approach to flooring than a standard bathroom. The floor is permanently exposed to standing water, direct shower spray, cleaning products, and constant foot traffic in wet conditions. A standard vinyl or tile installation — even a well-fitted one — will fail in a wet room if it doesn't meet the specific slip resistance, waterproofing, and drainage requirements of the environment. Our team has the specialist knowledge and product access to specify and install wet room flooring that genuinely performs under these conditions, not just on fitting day but for the long term.
We work with homeowners converting bathrooms into wet rooms, developers creating accessible wet room facilities in Peterborough's care sector and housing developments, and commercial clients in hotels, gyms, and healthcare settings who need flooring that performs under the most demanding conditions imaginable.
What Makes Wet Room Flooring Different?
Wet room flooring must satisfy requirements that standard bathroom flooring does not:
Slip resistance in wet conditions. The most critical requirement. Wet room flooring must maintain adequate grip when covered in standing water, soap, or cleaning products. We specify products with appropriate R-ratings and wet pendulum test values for the specific risk level of your wet room — domestic wet rooms, care home wet rooms, and commercial shower facilities all have different slip resistance requirements. See our safety flooring service for detailed guidance on slip resistance specifications.
Complete waterproofing. Every joint, seam, edge, and wall junction in a wet room floor must be completely watertight. A single gap or failed seal will allow water to penetrate the subfloor, causing structural damage, mould growth, and flooring failure. Our wet room installations use heat-welded seams and fully sealed wall junctions as standard — never relying on adhesive alone.
Drainage compatibility. Wet room floors must be designed around the drainage outlet. For sheet vinyl and safety flooring products, we cut and fit the floor to accommodate the drain precisely, ensuring water flows cleanly to the outlet without pooling. We coordinate the flooring installation with any shower former or tanking system already in place.
Hygiene. Wet room floors must be easy to clean thoroughly and should not harbour bacteria at joints or edges. Our seamless, heat-welded wet room floors eliminate the grout lines and unsealed joints that ceramic tile installations create, making them significantly more hygienic and easier to maintain — a critical consideration in care home and healthcare settings across Peterborough.
Wet Room Flooring Products We Install
Safety Vinyl (Sheet) — Our Primary Recommendation
For most domestic and commercial wet rooms across Peterborough, we recommend specialist safety vinyl sheet flooring as the primary wet room flooring solution. Products from brands like Altro, Polyflor, and Gerflor are specifically engineered for wet room environments — with built-in slip resistance, 100% waterproof cores, and the ability to be heat-welded at seams and coved at wall junctions for a completely seamless, hygienic finish. Altro Aquarius is our most frequently specified product for care home wet rooms across Peterborough — a benchmark product for the sector, available in a range of attractive colours and finishes that look far more welcoming than the utilitarian wet room floors of the past.
LVT — Premium Domestic Wet Rooms
For higher-specification domestic wet rooms where aesthetics are a significant consideration, certain luxury vinyl tile products are suitable for wet room use, provided the correct slip-resistant specification is selected and the installation is carried out with heat-welded seams and fully sealed perimeters. LVT wet room floors provide the visual appeal of stone or slate with the waterproofing and ease of maintenance of vinyl. We advise on which LVT products are appropriate for wet room environments — not all LVT products are suitable, and correct specification is critical.
Commercial Safety Flooring — High-Intensity Wet Environments
For gym changing rooms, hotel shower facilities, healthcare wet rooms, and commercial kitchen areas across Peterborough, we specify heavy-duty commercial safety flooring with high R-ratings (R10, R11, or R12 depending on the environment) and chemical resistance to cleaning products. Heat-welded seams and coved skirting are standard for all commercial wet room installations. See our commercial flooring service for more detail on commercial wet room specifications.
Our Wet Room Flooring Installation Process
Free site survey. We visit your property anywhere across Peterborough — Orton, Werrington, Hampton, Bretton, Whittlesey, Market Deeping, Stamford — to assess the existing wet room structure, drainage position, subfloor condition, and any existing tanking or waterproofing. We measure precisely and advise on the appropriate product specification for your specific environment.
Subfloor preparation. The subfloor must be completely flat, structurally sound, and free of any contamination before wet room flooring is installed. We apply self-levelling compound where required and ensure any existing tiles or old flooring are removed and the surface is fully prepared.
Precision cutting and fitting. The flooring is cut precisely to fit the wet room, including around drainage outlets, shower trays, and any fixed elements. Every cut is made with professional tools to ensure a clean, accurate fit at every edge.
Heat welding. All seams in wet room sheet flooring are heat-welded using a hot-air gun and matching vinyl welding rod — creating a completely waterproof, permanent bond that cannot be penetrated by water. This is the professional standard for all wet room installations and is non-negotiable for any environment where water management is critical.
Coved skirting. The flooring is turned up the wall at the base and sealed to create a completely coved, watertight junction between floor and wall. This eliminates the most common source of water ingress in wet room floors — the gap at skirting level where the floor meets the wall.
Final inspection and handover. We inspect every seam, joint, and wall junction to verify the installation is completely watertight. All waste and packaging are removed from your property.
Wet Room Flooring for Care Homes & Accessible Housing
A significant proportion of our wet room flooring work in Peterborough is in care homes, supported living schemes, and accessible housing developments where wet room facilities are standard for residents with reduced mobility. In these settings, the flooring specification must balance slip resistance with visual accessibility — providing colour contrast at thresholds and doorways to assist residents with visual impairment, meeting the requirements of the Equality Act and relevant building standards, and maintaining a welcoming, residential aesthetic rather than an institutional feel.
We work with care providers, housing associations, and developers across Peterborough and the surrounding area to specify and install wet room flooring that meets all relevant requirements. See also our new build flooring service for specialist care sector and affordable housing developments.
Local Projects — Wet Room Flooring Across Peterborough
Orton Longueville — Domestic Wet Room Conversion
A homeowner in Orton Longueville converted their existing bathroom into a level-access wet room as part of a wider accessibility adaptation for an elderly relative moving into the property. The existing ceramic tile floor was removed and the subfloor levelled before we installed Altro Aquarius in a warm stone effect — heat-welded throughout and fully coved at the walls. Colour-contrast threshold bars were fitted at the doorway to assist with visual navigation. The result was a wet room that looked genuinely contemporary rather than institutional, and provided the slip resistance and level access required for safe, independent use.
Stanground Care Home — Wet Room Suite Refurbishment
A residential care home in Stanground needed to refurbish eight en-suite wet room facilities as part of a wider redecoration programme. We installed Altro Aquarius throughout all eight rooms — heat-welded at all seams and fully coved at every wall junction. The work was phased room by room to ensure residents were never without bathroom facilities simultaneously. Colour-contrast threshold bars were fitted at all doorways. The facilities manager described the finished wet rooms as “immeasurably better than the previous ceramic tile floors, both in appearance and in how easy they are to clean.”
Hampton — Premium Hotel Suite Wet Room
A boutique hotel undergoing refurbishment in the Hampton area needed premium wet room flooring for twelve en-suite bathrooms. We specified a large-format stone-effect safety LVT with a discreet slip-resistant surface texture — providing the luxurious aesthetic appropriate for a premium hotel room while delivering the slip resistance required for guest safety. All seams were heat-welded and edges sealed to hotel specification. The hotel's interior designer commented that the floors were “indistinguishable from genuine stone at first glance, which was exactly what we needed.”
Areas Covered for Wet Room Flooring
Orton Goldhay, Orton Longueville, Orton Waterville, Werrington, Hampton Vale, Hampton Gardens, Bretton, Paston, Longthorpe, Eye, Stanground, Whittlesey, Market Deeping, Stamford, Yaxley, Sawtry, and Huntingdon. Free site surveys with no call-out charge across all PE postcodes.
Related Services
Safety flooring Peterborough | Vinyl flooring | LVT flooring | Carpet fitting Peterborough | Commercial flooring | Landlord flooring | HMO flooring Peterborough | New build flooring | Entrance matting | Carpet tiles | About us | Contact us
FAQs — Wet Room Flooring Peterborough
What is the best flooring for a wet room in Peterborough?
Specialist safety vinyl sheet flooring — such as Altro Aquarius or Polyflor Expona — is our primary recommendation for wet rooms. It is 100% waterproof, has built-in slip resistance, can be heat-welded at seams for a completely watertight finish, and is available in a wide range of attractive designs.
Do you heat-weld wet room flooring seams?
Yes — heat welding is mandatory for all wet room flooring installations. It creates a permanently waterproof seam that cannot be penetrated by water, steam, or cleaning products. We never install wet room flooring with adhesive-only seams.
Can LVT be used in a wet room?
Certain LVT products with appropriate slip resistance specifications can be used in wet rooms, provided seams are heat-welded and edges are fully sealed. We advise on which LVT products are suitable for wet room environments and which are not — the specification matters significantly.
Do you cover Orton, Werrington, and Hampton for wet room flooring?
Yes — all Peterborough neighbourhoods and the surrounding 10-mile area. Free site surveys with no call-out charge across all PE postcodes.
Free Wet Room Flooring Survey — Peterborough & Surrounding Areas
Contact Cambridgeshire Carpets for a free, no-obligation wet room flooring survey anywhere across Peterborough, Orton, Werrington, Hampton, Whittlesey and the wider PE postcode.